Skip to main content

Fuel System

Tank System​

The total usable fuel of the A320 = 18728 [kg] ~ 8 [h]

Hydraulic System

Outer Tanks are relatively small but due to their leverage they:

  • Reduce bending of wing surface
  • Reduce wing fluttering
  • Lower the structural weight at the wing root

The fuel from those tanks cannot be used directly, since the fuel transfers to the respective inner tank via fuel transfer valves. The fuel from the outer tank will transfer automtically into its respective main tank via a transfer valve. Both transfer valves open simultaneously when one main tank reaches - 750 [kg].

The fuel is also used for the cooling of the engine oil and the integrated drive generators (IDG).

For engine oil cooling the fuel is passed through a servo fuel heater and a fuel/oil heat exchanger, before it goes into the Hydro Mechanical Unit. This unit is responsible for regulating the fuel flow to the engine and also regulate the hydraulic signals for other systems.

For IDG cooling, some fuel is taken from the HMU and passes through the IDG Oil Cooler, before it then is returned to the Outer Fuel Tanks. This fuel return system is very clever and uses different return fuel flows and mixes them with cold fuel to ensure a relative constant oil temperature for the engine and IDG oil. There are situations where actually no fuel is returned to the outer tanks.